|
|
|
| CM-i886
(886CORE)
module |
| |
| |
（Top View ） |
（Bottom View） |
| |
| CM-i886 Highlights |
-
Full-featured
high performance embedded PC
-
Celeron
or Pentium-IIITM CPU, 600 - 1260 MHz
-
PCI,
LPC and AC97 buses
-
32
- 384 Mbyte SDRAM
-
16
- 512 Mbyte Flash Disk (optional)
-
SXGA
graphics controller for CRT and LCD (optional)
-
Power
Management
-
Two
USB ports
-
COM
ports, LPT port, I/O ports, hard and floppy disk controllers, PS/2
keyboard and mouse ports
-
One
or two 10/100BaseT Ethernet ports (optional)
-
Embedded
BIOS
-
Small
size - 91 x 96 mm
-
Interchangeable
with other CORE modules via CAMI connectors
-
SB-i886
- turns the CM-i886 module into a stand-alone PC
For more
information, see Developer
Resources page.
* Pentium is
a registered trademark of Intel Corporation.
|
The
CM-i886 Module is a small but extremely powerful
PC-compatible single board computer, designed to serve as a building
block in a variety of embedded applications. The CM-i886 module has
all the components needed to run operating systems such as Windows 98
/ NT / XP / CE, Linux, VxWorks or DOS. Ready BIOS and operating
systems packages are available from CompuLab.
The CM-i886 is both small and
inexpensive relative to products of its class, which allows its
integration into compact embedded applications where extraordinary
processing power is required.
The feature set of the CM-i886 module
includes practically all of the components found in a high-end
seventh-generation desktop computer. For embedded applications, the
CM-i886 provides a Flash Disk, PCI bus, two 100Mbit Ethernet ports,
UART's, I/O lines and many other essential functions.
CM-i886's standardized CAMI (CompuLab's
Aggregated Module Interface) connectors allow interchangeability with
other CORE modules, enabling the
flexibility required in a dynamic market where application
requirements can change rapidly.
Software support for the CM-i886 includes ready-to-run packages for:
* Linux
* Windows 98 / NT / CE / XP
* VxWorks
* DOS with networking
See O/S
Support Coverage Map
|
Block Diagram
Feature List
|
Common Features
(available in all configurations)
|
| CPU |
Celeron
or Pentium-III selection, 600 - 1260 MHz |
| Chipset |
Intel
82815 (with Graphics) or 82815EP (without Graphics) |
| Address
Space |
256
MB |
| Cache |
16+16
KB L1, 128, 256 or 512 KB L2, depending on CPU type |
| JTAG
Port |
Yes |
| DRAM |
SDRAM,
64-bit, 100 MHz. 32 - 128 MB soldered, plus 256 MB with on-board SO-DIMM
socket. |
| BIOS
Flash |
1/2
Mbyte, on-board reprogrammable |
| Flash
Disk |
16
- 512 Mbytes, NAND Flash based, optional |
| I/O
Levels / Tolerance |
3.3-volt
levels, 5-volt tolerant (most of lines) |
| Buses |
PCI,
LPC, AC97 |
| PCI
Bus |
32-bit,
33MHz, Rev 2.2, 3.3V levels, 5V tolerant, arbiter and clock |
| Interrupt
Controller |
Dual,
8259-compatible |
| DMA
Controller |
Two
cascaded 8237, two PCI DMA's, LPC DMA |
| General
Purpose I/O |
20
lines (shared with other functions) |
| Real
time clock |
146818A-compatible,
including CMOS RAM |
| Timers |
8254-compatible |
| Graphics
Controller |
VGA
- SXGA compatible, up to 1600 x 1200 resolution, up to 24-bpp |
| Display
Support |
Direct
support for RGB CRT monitors or LCD Panels |
| USB
Controller |
Dual
1.5 Mbit/sec or 12 Mbit/sec, 2 channels, Host mode |
| IDE
(Hard Disk) Interface |
PC/AT
compatible, Ultra ATA, 66 MB/s |
| Watchdog |
Timers
to generate SMI and Reset |
| Heat
sink |
Passive
25 mm heatsink. Provisions for optional
fan. |
|
Super-I/O
(available in all configurations)
|
| Chipset |
Winbond W83627HF |
| Parallel Port |
Bi-directional with EPP
mode. ESD protection and filters included |
| UART's |
COM1 (RS232), COM2 (TTL),
16550 compatible, 1.5 Mbps |
| Floppy Disk Controller |
Shared interface with LPT
port |
| Keyboard Interface |
AT, PS/2 or redirection from
COM |
| Mouse Interface |
PS/2 |
| Infrared (IrDA) Port |
SIR, up to 115Kbps |
| Bus Interface |
LPC |
| A/D Converters |
6 channels, 8-bit, 0-4V
input range |
|
ETHERNET Ports
(optional)
|
| Controller |
Intel 82551, including MAC
and PHY functions |
| Network Interface |
10/100BaseT, Activity LED's |
| Bus Interface |
PCI |
| Number of Ports |
none, 1 or 2 |
|
Power
|
| Supply Voltage |
Dual:
3.3V, 2.2A (max)
5.0V, 1 to 6A depending on CPU speed |
Power consumption,
excluding CPU |
6 watt |
| Power consumption of CPU
(max) |
Celeron 733 MHz - 22.8 W
Pentium III 600 MHz - 19.6 W
Pentium III 1000 MHz - 29.0 W
Pentium III 1260 MHz - 29.5 W |
|
Mechanical and
Environmental Specifications
|
| Dimensions |
91 x 96 x 30
mm. Height specified with heat sink. |
| Weight |
250
gram, including heatsink |
| MTBF |
> 100,000 hours |
| Operation temperature (case) |
| Commercial: |
0o to 70o C |
| Extended: |
-20o
to 70o C |
| Industrial: |
-40o
to 85o C. Click for availability
note |
|
| Storage temperature |
-40o to 85o
C |
| Relative humidity |
10% to 90% (operation)
05% to 95% (storage) |
| Shock |
50G / 20 ms |
| Vibration |
20G / 0 - 600 Hz |
| Connector insertion /
removal |
5 cycles |
|
友情连接
