|
| SB-i886 Highlights |
-
PC/104+
Single Board Computer using the CM-i886
module
-
Pentium
III or Celeron CPU selection, 600 to 1260 MHz
-
PC/104
(ISA) and PC/104+ (PCI) expansion buses
-
32
- 384 MB SDRAM
-
16
- 512 MB Flash Disk
-
Two
COM ports with RS232 / RS485 / RS422 / TTL driver
options
-
IrDA,
LPT, GPIO, PS/2 keyboard and mouse interfaces
-
2
Host USB ports
-
Hard
and floppy disk interfaces
-
Sound
I/O (optional)
-
VGA
/ SXGA graphics controller. Connectors for LCD
panel and CRT monitor (optional)
-
Single
or dual 10/100BaseT Ethernet ports (optional)
-
Single
or Dual Card Bus / PCMCIA slots (optional)
-
Lithium
battery for RTC
-
Small
size - 96 mm x 91 mm
|
The
SB-i886 is a PC/104+ compliant, single board
computer. It uses a CM-i886
module to implement most of the provided functions and
also implements several additional important functions
on-board. The rich set of features provided by the SB-i886 is customizable according to the price / performance targets
of the user's application.
The SB-i886 contains PC/104+
expansion connectors which open it to the wide range of
standard peripheral cards. Furthermore, the 886BASE contains
a PCMCIA / Card Bus controller and slots. A PCMCIA
card may be inserted and secured in the slot, with no
additional mechanical means. Off-the-shelf PCMCIA modules
can extend the system with capabilities such as a larger
solid state disk, modem, and wireless LAN.
For more information, see
Developer
Resources page.
|
Block Diagram
SB-i886 Features
The "BASE Option" column
specifies the P/N code of SB-i886 required to have the particular
feature. The "CORE Option" column specifies the P/N
code of CM-i886 required to have the particular feature. SB-i886
content is the combination of features provided by the attached
CM-i886 and the features implemented on the SB-i886
itself. To have
a particular feature, both the CORE and BASE options of that feature
must be implemented.
"+" means that the feature is always available, regardless
of P/N code.
| Feature |
Specification |
BASE
Option |
CORE
Option |
CPU
SDRAM
Flash Disk |
See Features List of
CM-i886 module |
|
|
| COM 1 |
RS-232 levels, standard 10-pin
header for DB-9 cable/connector |
+ |
+ |
| COM 2 |
RS-232 / RS-485 / RS-422 / TTL
level options, standard 10-pin header for DB-9
cable/connector |
+ |
+ |
| IrDA |
Standard header for SIR LED
module |
+ |
+ |
| LPT (Parallel Port) |
Standard 26-pin header for
DB-25 cable/connector. Shared with FDC |
+ |
+ |
| IDE |
PIO and ATA-66 modes. Standard
40-pin header for HDD cable. |
+ |
+ |
| FDC |
Routed through LPT header |
+ |
+ |
| Ethernet |
One or two 10/100BaseT
Ethernet ports. Realtek RTL8139 controller with MAC and PHY
functions, PCI interface.
10-pin header per port. Optional interface module with
transformer, RJ-45 connector and activity LED's. |
+ |
E1
or
E2 |
| CRT Monitor |
10-pin header. Optional
interface module with HD-15 VGA connector. |
+ |
G1/G2 |
| LCD Panel |
51-pos FPC connector for
direct interface to certain LCD panels |
+ |
G2 |
| PS/2 |
Standard headers for PS/2
cable/connector |
+ |
+ |
| GPIO |
20 lines, through 50-mil
header. |
+ |
+ |
| PCMCIA / Card Bus |
TI PCI1420 controller. Support
for 16-bit PCMCIA and 32-bit CardBus standards.
Single or dual PCMCIA / Card Bus slot with card guides, for
card types I, II and III. |
C1
or
C2 |
+ |
| USB |
2 Host ports, 12 Mbps. Header
for Type-A cable/connector. |
+ |
+ |
| Sound I/O |
CS4202 audio codec. Header for
standard cable/connectors for Microphone (mono), Line input
and Speakers (stereo) |
A |
+ |
| PC104 |
LPT-to-ISA bridge. PC/104 bus
through standard PC/104 connector |
P |
+ |
| PC104+ |
PCI bus through standard
PC/104+ connector |
R |
+ |
Electrical,
Mechanical and Environmental Specifications
| Power Supply |
5.0V @1-6A
and 3.3V @1-3A. Current depends
on CPU type and speed |
| Dimensions |
96 mm x 91 mm x [30-40
] mm.
Height ranges from 30 mm to 40 mm, depending on the
connectors assembled. Height specified includes the 886CORE
module with heatsink. |
| Operation temp (case) |
| Commercial: |
0o
to 70o C |
| Extended: |
-20o
to 70o C |
| Industrial: |
-40o
to 85o C. Click for availability
note |
|
| Weight |
200 gram |
| Storage temperature |
-40o to 85o
C |
| Relative humidity |
10% to 90% (operation)
05% to 95% (storage) |
| Shock |
50G / 20 ms |
| Vibration |
20G / 0 - 600 Hz |
|
友情连接
