万禾主页 页首 产品介绍 产品开发 产品定购 联系信息 公司简介
 
微型芯片模块
CM-X255
CM-i586
CM-i686
CM-i786
CM-i886
 
PC104+接口底板
SB-X255
SB-i586
SB-i686
SB-i886
 
Mini-ATX接口底板
SB-ATX-X255
SB-ATX-686
SB-ATX-886
SB-i786
相关主题
微型芯片模块对照表
PC104底板对照表
MiniATX底板对照表
评估套件
Linux支持
温度支持
 
SB-i686(686BASE)模块
  The SB-i686 is a standard PC/104+ compliant, single board computer. It uses a CM-i686 module to implement most of the provided functions and also implements several additional important functions on-board. The rich set of features provided by the SB-i686 is customizable according to price / performance targets of the user's application.

    The SB-i686 contains a PC/104+ expansion connectors which opens it to the wide range of standard peripheral cards. Furthermore, the SB-i686 contains a PCMCIA / Card Bus controller and slots.  A PCMCIA card may be inserted and secured in the slot, with no additional mechanical means. Off-the-shelf PCMCIA modules can extend the system with capabilities such as a larger solid state disk, modem, and wireless LAN.
 
 
(Top View )

(Bottom View)
 
主要特性
  "BASE Option" column specifies the P/N code of SB-i686 required to have the particular feature.  "CORE Option" column specifies the P/N code of CM-i686 required to have the particular feature. The SB-i686 content is the combination of features provided by the attached CM-i686 and features implemented on SB-i686 itself. To have the particular feature, both CORE and BASE options of that feature must be implemented.
"+" means that the feature is always available, regardless of P/N code.
 
Feature Specification BASE
Option
CORE
Option
CPU
SDRAM
Flash Disk
See Features List of CM-i686 module    
COM 1 RS-232 levels, standard 10-pins header for DB-9 cable/connector + +
COM 3 Rx/Tx only, TTL levels, 50-mil header + +
COM 2 & 4 RS-232 / RS-485 / RS-422 / TTL level options, 50-mil header X,Y S
IrDA / COM5 Standard header for SIR LED module or COM 5 Tx/Rx TTL + +
LPT (Parallel Port) Standard 26-pin header for DB-25 cable/connector. Shared with FDC + S
IDE PIO and ATA-33 modes. Standard 40-pin header for HDD cable. H +
FDC Routed through LPT header + S
Ethernet One or two 10/100BaseT Ethernet ports. Realtek RTL8139 controller with MAC and PHY functions, PCI interface.
10-pins header per port. Optional interface module with transformer, RJ-45 connector and activity LEDs.
+
or
E2
E
CRT Monitor 10-pins header. Optional interface module with standard HD-15 VGA connector. + Gx
TFT Panel 31-pos FPC connector for direct interface to certain TFT panels L Gx
STN Panel 10-pos FPC connector for direct interface to certain STN panels with built-in controller. (STN panels w/o built-in controller are not supported) + +
PS/2 Standard headers for PS/2 cable/connector + S
GPIO 20 lines, through  50-mil header. + S
ADC Analog to Digital converters, 8-bit, 6 channels. Through  50-mil header. + S
PCMCIA / Card Bus TI PCI1420 controller. Support for 16-bit PCMCIA and 32-bit CardBus standards.
Single or dual PCMCIA / Card Bus slot with card guides, for cards type I, II and III.
Cx +
USB 3 Host ports, 12 Mbps. Header for Type-A cable/ connector.   U +
Sound I/O Header for standard cable/connectors for Microphone (mono), Line input and Speakers (stereo) + A
PC104 ISA bus through standard PC/104 connector P +
PC104+ PCI bus through standard PC/104+ connector R +
电气、机械和环境指标
供电电压 单电压5.0V或3.3V(3.3V电压操作仅仅只用于带超级I/O和语音系统)
尺寸 96 mm x 91 mm x [10-22 ] mm.
范围从10 mm到22 mm,依靠控制器组合。包括686CORE模块。
工作温度(加外壳) 商用:0℃至70℃
扩展:-20℃至70℃
工业:-40℃至85℃(仅适用于某些配置)
储存温度 -40℃至85℃
相对湿度 10%至90%(运行)
5%至95%(储存)
抗震 50G/20ms
抗抖动 20G/0-600Hz
结构图
 
     
  友情连接